3 Tips for Making Your Best Fudge (2024)

Listen to This Article:

Loading the Elevenlabs Text to Speech AudioNative Player…

What’s not to love about fudge? It melts in your mouth, coating your tongue in rich and creamy sweetness.

However, making meltaway fudge isn’t always easy! If you don’t understand the proper techniques, you may end up with a grainy or crumbly rather than creamy confection.

If you want to get a better hold on making fudge, join us as we dive into some of the culinary science that pastry arts students can explore during their time at Escoffier.

How to Make Fudge

The simplest fudge recipes start with three ingredients found in many types of confections: sugar, butter, and milk. However, some recipes contain variations on these ingredients, like swapping sweetened condensed milk for the milk and sugar, or semi-sweet chocolate chips for some of the sugar.

Many types of fudge also contain additional ingredients like chocolate, vanilla, or maple syrup, as well as mix-ins such as nuts and marshmallows.

No matter the exact ingredients you use, the fudge-making process will be similar. First, you’ll heat the ingredients to dissolve the sugar and create a hom*ogenous mixture. Next, you’ll cook the mixture until it thickens. Finally, you’ll remove the fudge from the heat, allow it to cool, and then mix thoroughly.

Tips for Making Fudge

Smooth, creamy, and decadent fudge relies on proper technique, so keep these tips in mind when whipping up your next batch.

1. Monitor the Temperature with a Candy Thermometer

If you end up with soft fudge that turns into a puddle in your hands or hard fudge that is a bit reminiscent of a crunchy candy, improper temperature is likely to blame. If you don’t heat your fudge to a high enough temperature, you’ll end up with a soft product. And if you heat the mixture too much, your fudge may be harder than you’d like.

When you’re cooking your fudge over the stove, you should aim for a maximum temperature between 234-237ºF. Yes, that’s only a three-degree range! In order to ensure you remove your fudge from the heat as soon as it reaches this temperature, you should monitor the mixture with a candy thermometer.

2. Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it’s time to put the spoon down.

If you continue stirring once the mixture is simmering, you are encouraging the development of sugar crystals. While crystallization is the goal if you’re making hard candy, crunchy sugar bits can quickly ruin a fudge’s silky smooth texture.

3. Beat Thoroughly

While you shouldn’t mix the fudge mixture when it’s hot, you should beat the mixture once it has been removed from the heat and cooled.

Once again, turn to your candy thermometer. When the mixture has cooled to 110ºF (but not a moment before), it’s time to pick up a wooden spoon and begin stirring. Continue mixing the fudge until it has lost most of its sheen, about 5–10 minutes.

If you mix the fudge when it’s too hot, the sugar particles may lump together and form discernable crystals. Therefore, monitoring the temperature is key!

3 Tips for Making Your Best Fudge (1)

Proper technique is an essential part of creating silky smooth fudge.

Chocolate Fudge Recipe

Keep the previous fudge tips in mind as you follow this recipe for chocolate fudge.

Ingredients

  • 28 oz granulated sugar
  • 12 oz whole milk
  • 6 oz corn syrup
  • 4 oz butter
  • 5 oz unsweetened chocolate
  • ¼ tsp salt
  • 1 tbsp vanilla

Directions

  1. Prepare an 8×8 pan by lining it with butter-coated parchment paper or aluminum foil.
  2. Place the sugar, milk, and corn syrup in a medium saucepan and stir well. Once the mixture begins to boil, stop stirring. Monitor the mixture and watch for it to reach 230ºF.
  3. Add the butter, chocolate, salt, and vanilla and bring the temperature up to 235ºF. Remove from heat.
  4. Once the mixture has cooled to 110ºF, mix it with a wooden spoon until it loses the majority of its sheen.
  5. Pour the mixture into the prepared pan and let it cool fully before slicing.

Continue Improving Your Pastry Skills

Now that you know some of the tips for making fudge, it’s time to think about what other confections and baked goods you’d like to create! Whether you want to make a chewy yet tender loaf of bread or decorate a cake with smooth fondant and intricately piped roses, understanding the technique behind successful dishes is key.

Pastry school can introduce you to both the science and art involved in creating some of your favorite sweet treats and savory baked goods. By working with talented chef instructors, you can explore inside tricks and tips and receive individualized feedback as you practice creating new dishes.

By the time students graduate from , many find they are ready to move toward career goals like starting a bakery or beginning a career as a cake decorator. If you’d like to take the next step to accomplish your pastry dreams, contact us for more information.

To learn more about baking & pastry, check these out next:

  • Cake Decorating Tips: How to Choose the Right Pastry Bag
  • What Is It Like to Be a Pastry Chef?
  • 6 Advanced Baking Techniques Every Pastry Chef Should Know

This article was originally published on December 25, 2016, and has since been updated.

*Information may not reflect every student’s experience. Results and outcomes may be based on several factors such as geographical region or previous experience.

3 Tips for Making Your Best Fudge (2024)

FAQs

3 Tips for Making Your Best Fudge? ›

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

What is the secret to making good fudge? ›

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

What is the process of making fudge? ›

Commercial fudges are generally prepared by mixing milk, corn syrup (glucose), sugar, fat, a little salt, and suitable flavoring matter such as chocolate; cooking the resulting mixture to a temperature of about 235 F. to 245 F., while agitating the mix; cooling the mix to a temperature between 90 F.

How do you know when fudge is beaten enough? ›

After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.

What is the key to successful non grainy fudge? ›

While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking.

How to make fudge creamy and not grainy? ›

Grainy Fudge

To avoid this issue, swirl the pan instead of stirring it with a spoon. You can use a wet pastry brush to wipe down any sugar that sticks to the sides of the pot.

What makes fudge smooth? ›

For first-time candy makers: Look for recipes that call for corn syrup, marshmallows, or marshmallow crème. These ingredients prevent crystallization of sugar into large grains, so the texture of the fudge will remain smooth. Also, recipes using cream or condensed milk are less likely to curdle than regular milk.

What makes fudge hard or soft? ›

Fudge usually behaves this way when it's not cooked to a high enough temperature (due to oversight or a faulty candy thermometer). If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

What makes fudge dry and crumbly? ›

If it doesn't boil, your fudge will end up too mushy, and if it cooks for too long, you'll end up with a dry, crumbly mess. This is why many recipes recommend using a candy thermometer, so you know exactly when to remove your mixture from the heat.

What makes fudge different? ›

Although fudge often contains chocolate, fudge is not the same as chocolate. Chocolate is a mix of cocoa solids, cocoa butter and sometimes sugar and other flavorings and is hard and brittle. Fudge is a mixture of sugar, dairy and flavorings that is cooked and cooled to form a smooth, semi-soft confection.

What makes fudge chewy? ›

Chewy fudge results from the excessive moisture present in the mixture, which means the fudge was not cooked to the right temperature and could not be cooked enough to release the moisture. However, take care not to overcook fudge because it will take away the moisture and leave you with hard, chewy candy.

How to get fudge soft? ›

One way to do so is to place the fudge in an airtight container with some source of moisture and leave it to absorb overnight. This could be: A bowl of water. A damp paper towel.

How long do you boil fudge to get to soft-ball stage? ›

How long does it take to make fudge:
  1. about 18 min to reach boiling.
  2. about 40 minutes to reach soft ball stage.
  3. 60 minutes to cool.
  4. 28 minutes to beat in a KitchenAid (your time for this may vary)
  5. 4 hours to set.

Why is my fudge not creamy? ›

Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.

How to make fudge more solid? ›

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

What does cream of tartar do in fudge? ›

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

How do I get my fudge to harden? ›

OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed. Cross your fingers and hope that the chocolate sets firmly before the fudge starts to thaw, and later impress your friends as you present them with your soft-centred chocolates.

Why does my fudge crumble when I cut it? ›

The ingredients for fudge are combined and cooked to 234 degrees, cooled to 110 degrees without stirring, then beaten until creamy. Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard.

What would cause fudge not to harden? ›

Homemade Fudge Doesn't Always Set

If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.

References

Top Articles
Latest Posts
Article information

Author: Dr. Pierre Goyette

Last Updated:

Views: 6104

Rating: 5 / 5 (70 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Dr. Pierre Goyette

Birthday: 1998-01-29

Address: Apt. 611 3357 Yong Plain, West Audra, IL 70053

Phone: +5819954278378

Job: Construction Director

Hobby: Embroidery, Creative writing, Shopping, Driving, Stand-up comedy, Coffee roasting, Scrapbooking

Introduction: My name is Dr. Pierre Goyette, I am a enchanting, powerful, jolly, rich, graceful, colorful, zany person who loves writing and wants to share my knowledge and understanding with you.